Makita MAC2400 alto calibre 2,5 CV Compresor De Aire.

Lo más importante

Compresores de Aire de la marca Makita

• Marca: Makita
• Categoría: Compresores de Aire
• Color: Fábrica
• Dimensiones: 20.25 x 19.5 x 19.75 pulgadas
• Calificación: 4,7/5
• Valoraciones: 1.321

Uso y compatibilidad

• Uso reportado: cortar.
• Uso reportado: moler.
• Uso reportado: pulverizar.

Datos técnicos destacados

• Dimensiones reportadas: 20.25 x 19.5 x 19.75 pulgadas (51.4 x 49.5 x 50.2 cm).
• Peso aproximado: 39.0 lb (17.7 kg).
• Calificación promedio de 4,7/5.
• Más de 1.000 valoraciones.
• Posición destacada en Compresoras de Aire Portátiles: #89.
• Garantía: 1 año de piezas y mano de obra.

Preguntas resueltas

Reseña del editor Compresor de aire lubricado con aceite eléctrico portátil, tipo de tanque de doble pila, HP 2.5, voltaje de 115 VCA, amperios de carga completa 12.3, CFM de aire libre a 90 PSI 4.2, máx. Presión 130 psi, Tamaño del tanque 4.2 gal., Peso 77 lb., Material del cilindro Hierro Fundido, Tipo de lubricación Lubricado con aceite, Motor RPM 1730, Promedio Vida útil de la bomba 2, 000 hr., dBA @ 3 pies 79.0, longitud total 19-3/8 pulgadas, ancho total 18-3/4 pulgadas, altura total 18 pulgadas, aceite de compresor incluido. Yaxa Makita's 2.5HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability under tough job site conditions.2.5 HP with Big Bore Engineered PumpThe MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job-site conditions. The MAC2400 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.Versatile Design for a Range of ApplicationsThe MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC2400 is just another example of Makita's commitment to innovative technology and best-in-class engineering.About Makita Big Bore Air CompressorsMakita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.About MakitaMakita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.WarrantyEvery Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.What's in the BoxMakita MAC2400 2.5 HP Air Compressor, oil and 1/4-inch universal quick coupler.

La bomba de hierro fundido con cilindro y pistón Big Bore está diseñada para proporcionar un tiempo de recuperación más rápido para un mejor rendimiento Potente motor de 2.5 HP de 4 polos produce 4.2 CFM a 90 PSI para mayor productividad y menor ruido La construcción de jaula antivuelco proporciona protección completa para resistir entornos extremos del lugar de trabajo El bajo consumo de AMP reduce la incidencia de interruptores disparados en el arranque La bomba está lubricada con aceite para temperaturas de funcionamiento más frías y un desgaste reducido Lubricada con aceite: Bomba de funcionamiento más fresco, minimiza el desgaste El cilindro de hierro fundido duradero reduce el desgaste y aumenta la vida útil de la bomba; extraíble para un fácil mantenimiento Potente motor de 4 polos de 2.5 HP produce 4.2 CFM a 90 PSI para una mayor productividad Filtro de aire industrial de estilo automotriz grande para una mayor entrada de aire y una mayor eficiencia La bomba funciona a RPM más bajas (1,730), lo que resulta en un menor ruido (79 dB) y una durabilidad mejorada de la bomba