959290-BN QuickTrim Innovator Kit de molduras de elevación y giro, níquel cepillado Sin

Lo más importante

Mueble de interior Watco Manufacturing fabricado en plástico y con medidas de 3.7 x 3.6 x 3.6 pulgadas

• Marca: Watco Manufacturing
• Color: Sin
• Materiales: Plástico
• Tamaño: única
• Peso: 5.0 lb (2.3 kg)
• Calificación: 4,5/5
• Valoraciones: 44

Qué incluye

• Qué hay en la caja: Embudo.
• Incluye Embudo.

Datos técnicos destacados

• Dimensiones reportadas: 3.7 x 3.6 x 3.6 pulgadas (9.4 x 9.1 x 9.1 cm).
• Peso aproximado: 5.0 lb (2.3 kg).
• Calificación promedio de 4,5/5.
• 44 valoraciones visibles.
• Posición destacada en Coladeras de Bañera: #658.
• Disponible desde julio de 2013.

Preguntas resueltas

Reseña del editor Watco Manufacturing 959290-BN QuickTrim Innovator Kit de molduras de elevación y giro, níquel cepillado From the Manufacturer Install chrome on the rough-in and easily upgrade to a special finish without removing the strainer body. Watco's Model 959290 Innovator QuickTrim kits feature a strainer body cover that is thinner than a standard strainer body (.03-Inch ) that will not create a water dam. It also produces very little additional height or inside-diameter reduction. Watco's QuickTrim kits use an o-ring for a tight, snug fit (one for brass strainer bodies and one for zinc strainer bodies). There is no need for silicone, plumber's putty, or epoxy. Using a Watco Model 959290 Innovator QuickTrim kit eliminates the possibility of cross-threading or damaging the tub when replacing the strainer body, or of the drain fitting moving out of line due to being stressed during installation (can require cutting open the sheetrock to repair). It also eliminates destroying the integrity of your test. The Model 959290 Innovator QuickTrim kit includes a Push Pull brass knob, a Lift and Turn "D" pin, a Lift and Turn "D" ring, a Push Pull metal stopper, a seal (1-1/16-Inch diameter), a QuickTrim strainer body cover, a thick QuickTrim o-ring for brass bodies, a thin QuickTrim o-ring for zinc bodies, and an Innovator snap on overflow plate. The Innovator bath waste eliminates leaks caused by a loose overflow attachment. It also eliminates the need for a separate overflow test plug, dual inventory of one- and two-hole over-flow plates, and all screws. Pull knob to open the drain and push down to close it. No stopper rotation is required.

Las piezas de repuesto Stens se han convertido en las favoritas entre los profesionales del césped y el paisajismo gracias a un rendimiento excepcional